Stainless Steel

 
Strips for Welding Industry Strips for Welding Industry Strips for Welding Industry
 
THICKNESS TOLERANCES IN MM*
Thickness mm W ≤ 80mm W80mm to
160mm
W160mm to
250mm
W250mm to
625mm
0.05 to 0.10 ±0.008 ±0.010 ±0.015 ±0.020
0.11 to 0.15 ±0.010 ±0.015 ±0.020 ±0.020
0.16 to 0.25 ±0.015 ±0.020 ±0.025 ±0.030
0.26 to 0.40 ±0.020 ±0.025  ±0.030 ±0.035
0.41 to 0.60 ± 0.025 ±0.035 ±0.040 ±0.040
0.61 to 0.80 ±0.035 ±0.040 ±0.045 ±0.045
305 1.4303 0,06  18 12,5 
0.81 to 1.00 ±0.040 ±0.045 ±0.050 ±0.050
1.00 to 1.25 ±0.050 ±0.050 ±0.050 ±0.050
*as per JIS G 4313 Table 8
 
 
CAMBER*
WIDTH UPTO 40MM 12.70 mm in 2438 mm length (i.e. 5 mm in 1000 mm length)
OVER 40 MM UPTO 625 MM 6.35 mm in 2438 mm length (i.e 2.70 mm in 1000 mm length)
*as per ASME SA-480/SA-480M Table A2.29
FLATNESS*
Under 1.57 mm Width upto 625mm
Thick. (mm) Width (mm)
Upto 0.41 Upto 610 mm
0.41 to 0.76 Upto 914 mm
*as per ASME SA-480/SA-480M Table A2.8
 
EDGE CONDITION
Thickness mm W ≤ 20mm W 21mm to 50mm W 51mm to 200mm W 200mm to 625mm
Th ≤ 0.25 S.E + D.E + R.E S.E + D.E + R.E S.E S.E + M.E
0.26 to 0.60 S.E + D.E + R.E S.E + D.E + R.E S.E S.E + M.E
0.61 to 0.80 S.E + D.E + R.E S.E + D.E + R.E S.E S.E + M.E
0.81 to 1.00 N.A S.E + D.E + R.E S.E S.E + M.E
1.00 to 1.25 N.A S.E + D.E + R.E S.E S.E + M.E
Description
S.E Slit Edge* Slitting leaves a straight edge without exessive burr:
Burr height ≤ 10% of thickness
D.E Deburred Edge** After slitting, the corners are mechanically removed
R.E Round Edge** After slitting, the edge are mechanically rounded.
M.E Mill Edge Without Slitting
Without Slitting
*as per DIN Gk
** as per DIN SK
for tight tolerances consult us